Relay Units

  • The DIGIDIM 474 is a 4-channel ballast controller fitted with high-inrush relays rated at 16 A per channel. These relays handle short-lived high peak currents during switch-on of loads.
  • The 2-Channel Blinds Controller is a DALI-compatible interface unit that allows control of blinds and curtains in a DIGIDIM lighting control system. The blinds controller is a DIN-rail mounted unit that provides two independent control channels, each with two single-pole, volt-free contacts for switching up to 550 W up/down or power direction motors from a DIGIDIM system.
  • The 492 is a single-channel relay unit designed to allow control of non-DALI, nondimmable loads. The relay is a latching, volt-free contact, high-inrush type, with a contact rating of 16 A.
  • The 493 is a single-channel relay unit, designed to allow interfacing with other building control and management systems. The 493 signal relay unit is in a plastic enclosure, so it can be installed within a third-party equipment enclosure, electrical cabinet, or used as an in line unit.
  • The 4-Channel Relay Unit is a DALI-compatible interface unit designed to allow nondimmable loads to be incorporated into a DIGIDIM lighting control system. The relay unit is a DIN-rail mounted unit that can control four individually programmable relays. The relays are ‘normally open’, volt-free and can switch resistive loads of up to 10 A.
  • The DIGIDIM 498 8-Channel Relay Unit is fitted with highinrush specification relays, rated at 16 A per channel, which handle short-lived, high-peak inrush currents during switch-on of loads.
  • The DIGIDIM 8-Channel Latching Relay Unit is an eightchannel controller that supports high-inrush loads up to 20 A per output. Each output is controlled individually, and any mains-supply phase can be connected on any of them.
Go to Top